MF Digital SCRIBE EC_PC_manual - Manual (Page 21)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 21
System Startup
Before duplicating can begin it is necessary to review a few details.
• Verify that the voltage selector switch is set correctly. It is located
between the two power receptacles. The Scribe EC Standalone supports
both 115 VAC and 230 VAC at 50 ~ 60 Hz. Please confirm that the
appropriate voltage (115 VAC for North America) has been selected.
• Next, plug one end of the supplied power cord into the receptacle at the
rear of the unit.
0
CAUTION
Always use properly grounded receptacles or severe damage to
your system may result. The use of a surge protector or
Uninterruptible Power Supply (UPS) is highly recommended.