Curtis Mathes BLU-RAY DISC CMMBX72 - Manual (Page 20)

HDMI
HDMI
Connections
This section involves various methods of connecting the Blu-ray disc player to other external components.
1. Using an HDMI-HDMI cable connect the HDMI OUT terminal on the rear of the Blu-ray disc player to the HDMI
IN terminal of your TV.
2. Press the input selector on your TV remote control until the HDMI signal from the Blu-ray appears on your TV
screen.
If you have set the remote control to properly operate with your TV , press the TV INPUT SEL.button on the
remote control and select HDMI as the external source of the TV.
[NOTE]:
If the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG file, the player will stop
playing.
The player's video output will automatically change to HDMI mode when connecting an HDMI cable while
power is on).
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the use's manual of your TV.
Connecting to a TV with an HDMI Cable
HDMI auto detection function
[NOTE]:
・
・
HDMI
HDMI
HDMI Cable
TV
18