Ryvyr V-ARAS-80MDG - Manual

INSTALLATION INSTRUCTIONS
VANITY
V-ARAS-80XX
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver Level Drill Tape Measure Safety Glasses
10'
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you
encounter any installation problems, please don’t hesitate to contact us. Before you
begin, please observe all local building codes. Unpack the new product and inspect
for damage. Please ensure the finished wall is straight and plumb and the floor is flat
and perpendicular to the finished wall.
ROUGH-IN DIMENSIONS
INSTALLATION INSTRUCTIONS - WALL HUNG
• Requires 2 people.
• Position the vanity against the finished wall. If necessary, turn the leg levelers to achieve proper the proper level.
• Position the vanity against the wall, aligning the supply and drain locations so that they fall within the vanity.
• Install the counter top, sink, drain and faucet according to the manufacturer’s instructions.
INSTALLATION INSTRUCTIONS - WITH LEGS/FLOOR STANDING
• Same as above.
• See leg instructions.
NOTE: When installing with legs, the vanity should be attached to the wall using a screw and anchor set or directly
into the stud.
02.2015
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
FLOOR
FINISHED
WALL
ARAS
TM