Ryvyr V-WARWICK-60AC - Manual

INSTALLATION INSTRUCTIONS
WARWICK
VANITY
V-WARWICK-48AC | V-WARWICK-60AC
TM
09.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver Level Drill Tape Measure Safety Glasses
10'
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation.
If you encounter any installation problems, please don’t hesitate to contact us.
Before you begin, please observe all local building codes. Unpack the new
product and inspect for damage. The appearance of your vanity may differ from
the illustrations in this guide. These instructions still apply. Please ensure the
finished wall is straight and plumb and the floor is flat and perpendicular to the
finished wall.
ROUGH-IN DIMENSIONS
Model # Width
V-WARWICK-48AC x = 48" y= [1219mm]
V-WARWICK-60AC x = 60" y= [1524mm]
FLOOR
FINISHED
WALL
x” [y mm] 21.5” [546 mm]
34” [864 mm] 34” [864 mm]
4.5” [115 mm]
20.1” [511 mm]
10.0” [254 mm]
8.7” [220 mm]
6.9” [176 mm]