Remote switch kit installation -6, Remote switch assemblies -6, 4 remote switch kit installation – SkyHunter406 SKYHUNTER 406 HF User Manual
Page 24: 1 remote switch assemblies
MANL:INS:SH:X:XX
August 8 ,2013
Rev 25
6-6
6.4
REMOTE SWITCH KIT INSTALLATION
6.4.1 Remote Switch Assemblies
WARNING !!: The Remote Switch components contain components sensitive to static
electricity: ESD precautions should be used. Do not bend or modify existing connections on
the HD-DB15 as this could destroy components or inhibit correct ELT operation.
The instructions in this guide should be followed to ensure a systematic and correct installation.
Be sure all parts listed below have been included in your kit:
Remote Switch Components :
1. Remote Switch with Pre-wired assembly, this kit DOES include 25 feet of cable.
A. REMT:ROC:SH:A:XX – Remote Rocker Switch Assembly
B. REMT:MCO:SH:X:XX – Remote Rocker Switch Male Connector
C. REMT:BUZ:SH:A:PR – Backshell with Cable Assembly(25 ‘ of cable)
2. Remote Switch with Non- Prewired Assembly, this kit does NOT include any wire.
A. REMT:ROC:SH:A:XX – Remote Rocker Switch Assembly
B. REMT:MCO:SH:X:XX – Remote Rocker Switch Male Connector
C. REMT:BUZ:SH:A:XX – Backshell & Buzzer Assembly(Requires customer wire)
3. Special order remote kits available.