TeeJet MATRIX 570VT Software version 1.00 - Manual (Page 8)

8
www.teejet.com
Matrix ® 570VT ● ISOBUS
LCD Brightness
Figure 1-17: LCD Brightness
Figure 1-18: Touch Screen Calibration
Figure 1-19: About Matrix 570G
Figure 1-20: About Verification
LCD Brightness adjusts the brightness of the console display. Range is 0 - 100.
1. Press CONSOLE ICON .
2. Press LCD BRIGHTNESS ICON .
3. Press the UP/DOWN ARROW ICONS to adjust LED brightness.
• Higher the number, the brighter the LCD
• Lower the number, the dimmer the LCD
4. Press
►PAGE RIGHT ARROW to proceed to VT Number.
►SYSTEM SETUP TAB to return to main System Setup screen.
Virtual Terminal Number
Virtual Terminal Number defines the unique number for this specific VT terminal.
On systems with multiple VTs, each VT much have a unique VT number. Only VT
number 1 can show the auxiliary input allocation; therefore, there shall always be a
VT number 1. The remaining VTs can use any number. Range is 1 - 32.
1. Press CONSOLE ICON .
2. Press VT NUMBER ICON .
3. Press the UP/DOWN ARROW ICONS to adjust VT number.
4. Press
►PAGE RIGHT ARROW to proceed to Touch Screen Calibration.
►SYSTEM SETUP TAB to return to main System Setup screen.
WARNING! This number should not be changed from "1" unless there is more than
one virtual terminal on the system.
About/Save
About/Save screen displays the system software version as well as the software
versions of modules connected to the CAN bus.
To view system information:
1. Press CONSOLE ICON .
2. Press ABOUT ICON to view data including:
• Unit Model Number
• Software Version
• Connected Modules
3. Press
►CHECKERED FLAG to complete Console Setup.
►SYSTEM SETUP TAB to return to main System Setup screen.
Save About Information
To aid when troubleshooting problems in the field, an end user can use Save to
download a text file containing current software information to a USB drive, then
e-mail the file to support personnel.
1. Press CONSOLE ICON .
2. Press ABOUT ICON .
3. Insert a USB drive in the USB port.
4. Press the SAVE ICON .
“Saved version information to USB drive” will confirm save.
5. Press
►CHECKERED FLAG to complete Console Setup.
►SYSTEM SETUP TAB to return to main System Setup screen.
NOTE: The SAVE ICON is not available for selection (grayed out) until a USB drive is inserted properly.