Re-stflrt to continuq $eming, Modify add to ffluoru return, Error message during setting-up – SINGER 1500 Izek User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(SINGLE PATTERN)
(PATTERNS)
At the desired location, stop the
machine.
10
RE-STflRT TO CONTINUQ
$EMING
O
PfiTTERN NO.
fi
-001
► MODIFY
ADD TO FflUORU
RETURN
Push A Button to return to
screen 5. (page 26).
“ADD TO FAVORITES",
see page 28.
Push A Button to return to
screen 3 (page 26).
.Push the (▼) Control Pad
to select “E". This ends the
sewing and returns you to
the MENU screen.
Push the A Button
Error message during setting-up
EJ
CHECK FLASHING
AREA AND START
SEMING MACHINE
If the sewing machine is not set up correctly, the above message
will be displayed when starting the machine.
1. Push A Button.
2. The error message will be displayed. Fix the problem following
the instructions in the message. (Refer to page 67.)
3. When the error has been cleared, screen 8 (page 26) will be
displayed.
4. Start the machine.
* The start/stop switch on the sewing machine will flash red for 2 -
3 seconds and will then change to green. However, the sewing
machine will not start again until the cause of the error has been
properly cleared, even if you try to start the machine, so make
sure that you clear the cause of the error properly.
S7