Converting the upper looper into spreader, Installing the spreader, Removing the spreader – SINGER 14SH754/14CG754 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
18. CONVERTING THE UPPER
LOOPER INTO SPREADER
A
Warning;
Switch off the machine before installing
or removing the spreader.
Installing the spreader
Insert the pin (A) of the spreader in the
hole (B) of the upper looper.
Put the positioning rib (C) in contact
with the upper surface of the looper.
Insert the point (D) in the hole (E)
of the upper looper.
Removing the spreader
• Remove the point (D) of the hole (E)
of the upper looper and take the
spreader off the looper.
Note: Put the spreader back to the
accessory storage.
26
Advertising
This manual is related to the following products: