SINGER 14SH754/14CG754 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2) 2-Thread standard rolled hem stitching
Note: » These are suggested tension settings only.
♦ Tension settings are effected by;
1) Type and thickness of fabric
2) Needle size
3) Size, type and fiber content of thread
* See page26 to converting the upper looper
into spreader.
Correct Balance______________________________
• Set Each Tension Dial to Settings Shown at Right
and Test Sew on a Sample of Your Fabric
How to Balance
•
• When the lower looper thread is botton side of the
fabric.
- Turn the lower looper thread tension dial(yellow)
toward a higher number.
- Or, turn the needle thread tension dial (blue or
green) toward a lower number.
• When the needle thread tension is too loose;
-Turn the needle thread tension dial (blue on green)
toward a lower number.
- Or, turn the lower looper thread tension dial (yellow)
toward a lower number.
NEEDLE POSITION
SEAM WIDTH FINGER KNOB
STITCH LENGTH
SPREADER
► O
2-4
USE
Lower looper
thread
Topside
Underside
(503)
Tension Dial
Blue Green Orange Yellow
Light weigt
0
Spreader 5.0
Medium weight 0.5
Spreader
6.0
Heavy weight
1.0
Spreader 6.5
Tension Dial
Blue Green Orange Yellow
Light weigt
0
Spreader 5.0
Medium weight
0.5
Spreader
6.0
Heavy weight
1.0
Spreader 6.5
Lower looper
thread
Topside
Needle thread
Underside
Lower looper
thread
Topside
e thread
Underside
31