Maytag HE21250PC - Manual (Page 28)

Element Cleaning/
Replacement
Service and Maintenance (cont'd)
NOTE: These instructions are written for element cleaning
and element replacement for the lower element. If it is nec­
essary to clean or replace the upper element, dien repeat
these instructions.
3. Attach a hose to the water heater drain valve and put the
other end in a floor drain or outdoors. Open the water
heater drain valve. Open a nearby hot water faucet which
will relieve pressure in the water heater and speed draining.
To remove the element from your tank in order to clean or
replace it;
1. Before beginning turn “OFF” the electric power supply to
the water heater.
A WARNING
HAZARD OF ELECTRICAL SHOCK! Before removing
any access panels or servicing the water heater,
make sure the electrical supply to the water heater
is turned "OFF". Failure to do this could result in
DEATH, SERIOUS BODILY INJURY, OR PROPERTY
DAMAGE.
2. Turn off the water supply to the water heater at the water
shutoff valve or water meter.
A WARNING
The water passing out of the drain valve may be
extremely hot. To avoid being scalded, make sure all
connections are tight and that the water flow is
directed away from any person.
4. Remove the two screws securing the access panel, and
remove panel.
5. Remove the flap of insulation to expose the opening.
28