Section, 1 safety, Training – Troy-Bilt PRO LINE 645AMBRONCO User Manual

Page 3: Preparation, Operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Section

1 Safety

SPARK ARRESTER WARMING TO RESIDENTS OF CALIFORNIA AND SEVERAL OTHER STATES

Under California law, and under the laws of several other states, you are not permitted to operate an
internal combustion engine using hydrocarbon fuels on any forest, brush, hay, grain, or grass

covered land; or land covered by any flammable agricultural crop without an engine spark arrester in
continuous effective working order.

The engine on the unit is an internal combustion engine which burns gasoline, a hydrocarbon fuel, and must be equipped with a
spark arrester muffler in continuous effective working order. The spark arrester must be attached to the engine exhaust system in
such a manner that flames or heat from the system will not ignite flammable material. Failure of the owner/operator of the unit to
comply with this regulation is a misdemeanor under California law (and other states) and may also be a violation of other state
and/or federal regulations, laws, ordinances or codes. Contact your local fire marshal or forest service for specific information
about which regulations apply in your area.

Training

1. Carefully read this
Owner’s Manual, the
separate Engine Owner’s
Manual, and any other literature you may
receive. Be thoroughly familiar with the
controls and the proper use of the tiller
and its engine. Know how to stop the unit
and disengage the controls quickly.

2. Never allow children to operate the
tiller. Never allow adults to operate the
tiller without proper instruction.

3. Keep the area of operation clear of all

persons, particularly children and pets.

4. Keep in mind that the operator or user

is responsible for accidents or hazards
occurring to other people, their property,

and themselves.

Preparation

1. Thoroughly inspect the area where the

tiller is to be used and remove all foreign

objects.

2. Be sure all tiller controls are released
and both wheels are in the Wheel Drive

position before starting the engine.

3. Do not operate the tiller without
wearing adequate outer garments. Avoid

loose garments or jewelry that could get

caught in moving parts.

4. Do not operate the tiller when barefoot
or wearing sandals, sneakers, or light
footwear. Wear protective footwear that
will improve footing on slippery surfaces.

5. Do not till near underground electric
cables, telephone lines, pipes or hoses. If

in doubt, contact your telephone or utility

company.

6

.

Warning: Handle fuel with care; it is

highly flammable and its vapors are

explosive. Be sure to take the following

precautions:

a. Store fuel in containers specifically

designed for this purpose.

b. The gas cap shall never be removed

or fuel added while the engine is
running. Allow the engine to cool

for several minutes before adding
fuel.

c. Keep matches, cigarettes, cigars,

pipes, open flames, and sparks

away from the fuel tank and fuel
container.

d. Fill fuel tank outdoors with extreme

care. Never fill fuel tank indoors.

Use a funnel or spout to prevent

spillage.

e. Replace all fuel tank and container

caps securely.

f. If fuel is spilled, do not attempt to

start the engine, but move the

machine away from the area of

spillage and avoid creating any
source of ignition until fuel vapors

have dissipated.

7. Never make adjustments when engine

is running (unless recommended by
manufacturer).

Operation

1. Do not put hands or feet near or under
rotating parts. The tines begin to rotate
once the engine starts and the Forward
Clutch Bail (or Reverse Clutch Control) is
engaged.

2. Exercise extreme caution when on or
crossing gravel drives, walks, or roads.
Stay alert for hidden hazards or traffic. Do

not carry passengers.

3. After striking a foreign object, stop the
engine, remove the wire from the spark

plug and prevent it from touching the

spark plug, thoroughly inspect the

machine for any damage, and repair the
damage before restarting and operating

the machine.

4. Exercise caution to avoid slipping or
falling.

5. If the unit should start to vibrate abnor­

mally, stop the engine, disconnect the

spark plug wire and prevent it from
touching the spark plug, and check

immediately for the cause. Vibration is

generally a warning of trouble.

6

.

Stop the engine, disconnect the spark

plug wire and prevent it from touching

the spark plug whenever you leave the

operating position, before unclogging the

tines, or when making any repairs, adjust­

ments or inspections.

Advertising
This manual is related to the following products: