Aiwa NSX-A10 - Manual (Page 7)

PRESEHING STATIONS
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.
-0-9,+10
BAND
SHIFT
1 Press the TUNER/BAND button to select a band,
and press the DOWN or UP button to
select a station.
2 Press the II SET button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Frequency
ГОР j о ~l П nl ..'■i'i’r.. "I [ I I
м г т
I J
J - U
- - I I I .
В11Ю'
I l\/l I
' ' ' -
nii
Preset number
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
have already been stored for all the bands.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press the BAND button while pressing the SHIFT
button to select a band.
2 Press the numeric buttons to select a preset
number.
Example:
To select preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the ► PRESET button repeatedly.
Each time the button is pressed, the next higher number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the ■ CLEAR button, and press the II SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
■■■■■Ml
BASIC OPERATIONS
PLAYBA
II
2
3
IC
"i
V-!.-
LXrrTuHi
i..1 0 о
.., ...... .
[OJ PI—
- -
P“
ЭШ П
ODC q I
о Ш
i
DC
II
2
(Deck 2) (Deck 1)
Usable tapes
Use only normal (type I) tapes.
1 Press the TAPE button.
2 Press the M / ± button to open the cassette holder
and insert a tape exposed side down.
Push the cassette holder to close it.
3 Press the button to start playback.
Only the side facing you can be played back.
To stop playback, press the U/± button.
To pause, press the
II button. To resume play, press it again.
To fast forward or rewind, press the ◄◄ or ►► button in the
stop mode, and then press the M/± button to' stop winding.
When both deck 1 and deck 2 are set in the playback mode,
deck 2 is heard.
About cassette tapes
• To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
Tab for side A
To record on the tape again, cover the tab openings with
adhesive tape, etc.
' 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
' Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
ENGLISH
6