User manual, 3 configuring anonymous visit, 4 configuring ip address filter – 3xLOGIC VISIX Camera User Manual
Page 86
User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
78
1) Enter the RTSP Authentication interface:
Configuration> Advanced Configuration> Security > RTSP Authentication
Figure 10-‐5
RTSP Authentication
2) Select the Authentication type basic or disable in the drop-‐down list to enable or disable the
RTSP authentication.
3) Click
to save the settings.
10.3 Configuring Anonymous Visit
When
you
enable
this
function,
you
can
log
into
the
camera
without
a
username
and
password.
In
login
interface,
check
the
Anonymous
checkbox
and
click
Login
to
enter
the
camera
as
shown
in
Figure
10-‐7.
Figure 10-‐6
Anonymous Login
Figure 10-‐7
Login Interface
10.4 Configuring IP Address Filter
With this function on, the camera allows certain IP addresses whether to log in or not.
Filter Type
Description
Forbidden
Forbid
the
IP
addresses
added
in
the
IP
Address
Filter
interface
to
log
in.
Allowed
Allow
only
the
IP
addresses
added
in
the
IP
Address
Filter
interface
to
log
in.