DaySequerra M4FM - Manual (Page 9)

9
M4FM User Manual
Navigation
The M4FM employs a 3-button user interface. From the start ‘HomeScreen’ press the center button
once. An arrow will appear next to the frequency. Use the UP/DN arrow button to toggle the Arrow on
the LCD around the different fields on the HomeScreen. Press the Center button to select a field to
change. The arrow will start to flash indicating that the UP/DN arrows are available to change the value
of the field. Press the Center button to save and exit. To access the SYSTEM menu press and hold
the center button for 3 seconds.
M4FM Operating Description - Controls and Indicators
Front Panel
Figure 1.
Status
• Alarms – Bi-colored LED: Green indicates that an alarm is set. Red LED illuminates when an
alarm is active. Red will flash every second when an alarm conditions are met until either the
user disables the alarm or the conditions move outside of the set parameters. (*M4FM models
that are dated before 2015 do not support bi-colored LED’s)
• RDS – Blue LED illuminates when RDS data is available.
• Stereo - Blue LED illuminates when tuner has acquired and locked onto a Stereo signal
• RF Level – Bi-colored LED: Green indicates strong RF > 40 dB. Red indicates weak RF < 40
dB. (*M4FM models that are dated before 2015 do not support bi-colored LED’s)
• Up Arrow – Momentary push UP from the Homescreen will enter the Headphone volume menu.
Both arrows are used to increase and decrease the volume. From selection mode Press
ENTER again to change a value in any a field indicating a blinking arrow ready. Use the UP
and DOWN arrows to navigate/toggle through the available choices or range. UP Arrow button
tunes the frequency up one increment while tuning to a new station, when held for three
seconds it tunes faster at 1.5x speed. UP selects next stored preset station in PRESETS mode
(no faster mode, one push per preset). Selects next item in other menus and is used for other
functions as described herein. Holding the UP arrow while powering the unit on will restore
factory settings.
• Down Arrow – Momentary push DOWN from the Homescreen will enter the Headphone
volume menu. Both arrows are used to increase and decrease the volume. From selection
mode Press ENTER again to change a value in any a field indicating a blinking arrow ready.
Use the UP and DOWN arrows to navigate/toggle through the available choices or range.
DOWN Arrow button tunes the frequency down one increment while tuning to a new station,