Calibrate in the microsd mode, Calibrate – Digiframe DF-SCWF08w User Manual
Page 18
Advertising
![background image](/manuals/735290/18/background.png)
18
Calibrate
(cont'd)
Calibrate in the MicroSD Mode
1. Slide the WiFi/Micro SD switch to “MicroSD”.
2. Press and hold the /SCAN button for
10
seconds
until the WiFi LED blinks a purple light.
3. Remove the plastic foil on the Calibration Sheet,
place it on the table with the white side facing up.
4. Place the scanner on the Calibration Sheet, then
move it back and forth only in the white area few
times until the Scanner turns off.
Advertising