Insert aaa batteries – Digiframe DF-SCWF08w User Manual
Page 8
![background image](/manuals/735290/8/background.png)
8
Insert AAA Batteries
1. Push and slide the battery cover away to detach it
from the base.
2. Place 4 alkaline batteries according to the polarity
indicators inside the compartment.
3. Slide back the battery cover to close it.
4. Press and hold the /SCAN button for 3 seconds to
turn on or off the scanner.
• When a low battery alerts (a green Power LED blinks),
change the fresh batteries immediately.
• Never mix old and new batteries (replace all batteries at
the same time).
• Do not mix different types of batteries. Use the same or
equivalent type of batteries as recommended.
• Alkaline batteries are recommended for best
performance.
• Remove batteries when the scanner is not used for a long
time.
• Dispose of batteries safely (Do not dispose of batteries in
fire, batteries may explode or leak).
NOTES