Eurocom Electra 3 - Manual (Page 137)

Upgrading The Computer
Overview 6 - 1
6
Chapter 6: Upgrading The Computer
Overview
This chapter contains information on upgrading the computer. Follow the steps out-
lined to make the desired upgrades. If you have any trouble or problems you can con-
tact your service representative for further help. Before you begin you will need:
• A small crosshead or Phillips screwdriver
• A small regular slotted (flathead) screwdriver
• An antistatic wrist strap
The chapter includes:
• Removing the Battery
• Removing the Component Bay Cover - Model A
• Removing the Component Bay Cover - Model B
• Replacing the Component Bay Cover - Model A
• Removing the Component Bay Cover - Model B
• Upgrading the Hard Disk Drive
• Removing the Solid State Drive
• Upgrading the System Memory (RAM)
Please make sure that you review each procedure before you perform it.

Warranty Warning
Please check with your
service representative
before undertaking any
upgrade procedures to
find out if this will VOID
your warranty.
Antistatic Wrist
Strap
Before working with the
internal components
you need to wear an an-
tistatic wrist strap to
ground yourself be-
cause static electricity
may damage the com-
ponents.