Eurocom Electra 3 - Manual (Page 145)

Upgrading The Computer
Upgrading the Hard Disk Drive 6 - 9
6
Removing the Hard Disk Drive
Note that only a single Model is pictured, however the procedure is the same for both
models.
1. Turn off the computer, and turn it over and remove the battery (see page 6 - 3 )
and component bay cover (see page 6 - 4 / 6 - 5 ).
2. Lift the HDD sponge up at point , grip the tab , and slide the HDD assembly
in the direction of arrow .
3. Remove the HDD assembly .
Figure 6 - 6
Hard Disk Assembly
Removal
1 2
3
4
1
2
4
3