Call/send control, Fig. 12.1, Fig. 12.2 – EZ-ACCESS PASSPOR User Manual
Page 42
Page | 42
- OPTIONAL EQUIPMENT - CALL/SEND CONTROL
Multiple Call/Send Controls
can be used with the VPL.
This allows you to “call” the
platform from multiple
locations. (FIG. 12.1)
From the bottom of the
stairs, or landing; simply
press the DOWN button and
the platform descends.
From the top landing, deck,
or porch; simply press the
UP button and the platform
ascends.
FIG. 12.1
INSTALLATION:
1.
Connect the Call/Send Control cord to VPL by first removing rear cover. There will be a cord with a
3-pin connector inside the tower located in the area where the power cord exits the tower. Bring this
cord out of the tower, connect the Call/Send Control plug and tuck the connected plug back inside the
tower (FIG. 12.2).
2.
Reinstall the rear cover with the notch in the lower right corner (looking at the back of the VPL).
3.
Mount the Call/Send Control securely using #10 bolts or screws (not included) in a suitable location
where it can be accessed easily by the VPL user.
4.
Secure the Call/Send Control cord in such a manner that it will not interfere with the VPL operation or
pose a tripping hazard.
FIG. 12.2