LG Motorsports LG C6 Carbon ZR1 Splitter - Manual (Page 9)

For those of you that did install the GM factory nose support piece. For maxium
downforce you should also cut the factory air dam just under the aluminum rear support
piece and remove. You will also want to cut back the side pieces as well or completely
remove them, again for max. downforce. Street customers need not remove this, and by
keeping this piece in place it will help to increase highway fuel economy.
Lou Gigliotti
President LG Motorsports
LG Motorsports is not responsible for any improper install, modification to product, or
any changes made by installer to product. Any welding or modification will void any
product warrantee. LG Motorsports or the dealer is not liable for any loss, damage, or
injury due to the direct or indirect use of this product. These components are intended for
off-road use only and are not intended for use on street legal, pollution controlled
vehicles.