Lingenfelter L350080197 Lingenfelter C5 Corvette Mini Tub Kit - Manual (Page 7)

Page 6.
16. Remove the fiberglass and scuff all mating
surfaces with a high grit sandpaper. Apply a
sufficient amount of Plexus, Durabond or similar
bonding agent to obtain a watertight seal.
Install and pop the rivets into place.
17. Using a fiberglass repair kit, re-attach the
post on the hardtop or convertible speaker box
on the coupe. Silicone the edges to ensure a
watertight joint.
18. You will now install the plastic inner
fenders on the vehicle. Start by locating the
access panel on the inner fender.
19. Remove the upper right side push nut and
replace with push retainer that is supplied with
the installation kit.
IMPORTANT: Failure to do this step will
cause the tire to rub under full compression.