Lean to setup pyramid setup hunker™ setup – NEMO Equipment HUNKE2P User Manual

Page 2

Advertising
background image

Minimum Weight 7.5 oz / 213 g
Packaged Weight 7.7 oz / 218 kg
Packed Size 6.5 x 3 in dia / 17 x 8 cm dia
Floor Dimensions 81 x 80 in / 211 x 209 cm
Interior Height 36

in

/

91

cm

Floor Area

24

sq

ft

/

2.2

sq

m

Included Accessories

Drawstring

style

stuff

sack,

stakes,

and

repair

kit

©2012 NEMO Equipment, Inc. Confidential and Proprietary.

Title

72"

78"

50"

67"

93"

39"

LEAN-TO

PYRAMID

©2012 NEMO Equipment, Inc. Confidential and Proprietary.

Title

72"

78"

50"

67"

93"

39"

LEAN-TO

PYRAMID

LEAN TO SETUP

PYRAMID SETUP

HUNKER™ SETUP

Rough notes of setup ( will need review and finalizing from design)

1. Attach Red anchor to tree or ground with stake. If attaching to

tree attach at a height of 30”.

2. Lightly stake and tension out 2 side anchors.

3. Extend trekking pole into center pole pocket

4. Secure rear anchor and adjust side anchors if needed.

5. [optional] Secure anchor on grey rain flap for additional

coverage.

30”

1. Attach anchor point with red webbing to tree at
a height of about 30” or stake to ground.

2. Lightly tension and stake out the two side
anchors.

3. Extend trekking pole into center pole pocket
until front and side anchors are tensioned.

4. Secure rear anchor and adjust side anchors if
needed.

5. Stake anchor on gray rain flay for additional
coverage (optional). Roll up and secure with snap
if not needed.

Rough notes of setup ( will need review and finalizing from design)

1. Attach Red anchor to tree or ground with stake. If attaching to

tree attach at a height of 30”.

2. Lightly stake and tension out 2 side anchors.

3. Extend trekking pole into center pole pocket

4. Secure rear anchor and adjust side anchors if needed.

5. [optional] Secure anchor on grey rain flap for additional

coverage.

30”

Rough notes of setup ( will need review and finalizing from design)

1. Attach Red anchor to tree or ground with stake. If attaching to

tree attach at a height of 30”.

2. Lightly stake and tension out 2 side anchors.

3. Extend trekking pole into center pole pocket

4. Secure rear anchor and adjust side anchors if needed.

5. [optional] Secure anchor on grey rain flap for additional

coverage.

30”

Rough notes of setup ( will need review and finalizing from design)

1. Attach Red anchor to tree or ground with stake. If attaching to

tree attach at a height of 30”.

2. Lightly stake and tension out 2 side anchors.

3. Extend trekking pole into center pole pocket

4. Secure rear anchor and adjust side anchors if needed.

5. [optional] Secure anchor on grey rain flap for additional

coverage.

30”

Rough notes of setup ( will need review and finalizing from design)

1. Attach Red anchor to tree or ground with stake. If attaching to

tree attach at a height of 30”.

2. Lightly stake and tension out 2 side anchors.

3. Extend trekking pole into center pole pocket

4. Secure rear anchor and adjust side anchors if needed.

5. [optional] Secure anchor on grey rain flap for additional

coverage.

30”

Advertising