NEMO Equipment OB 2P - Manual (Page 3)

GUARANTEE
NEMO QUALITY RECOMMENDED
INNOVATIONS
NEMO PRODUCT
TECHNOLOGY
POLE SUPPORTED
TECHNOLOGY
AIRSUPPORTED
EXTREME CONDITIONS
EXTREME CONDITIONS POLE SUPPORTED
TECHNOLOGY
EXTREME CONDITIONS
STATISTICS
NEMO PRODUCT
NEMO is constantly developing new alumi-
num pole technology, hardware, and frame
configurations to maximize the strength,
wind resistance, interior volume, weight, and
usability of our tents. We pursue simplicity
and pure geometric forms wherever possible.
Classic arch shapes are used to fend off top
loads and catenary curves transfer tension
through fabric panels. Every design element
is deliberate and has a functional purpose,
much like nature itself.
OBI™ 2P HIGHLIGHTS
The DAC Jake’s Foot Corner Anchor System
makes setup fast and easy. The Jake’s Feet also im-
prove fabric tension by acting as cantilevers to pull
the corners of the inner tent closer to the ground.
Pole hubs at the front and rear of the tent allow
multiple poles to intersect at a single point creating
a unique pole architecture that allows free-stand-
ing support while minimizing pole weight.
Strategic controlled bends in the poles achieve
a maximum volume to weight ratio. By utilizing
bends in just the right places, this pole set creates
significantly more volume to sit up side by side in
the tent.
Two doors and two vestibules eliminate jostling
for position and gear storage. Both vestibules can
be used in multiple configurations depending on
weather conditions and your need for privacy.
Strategic cutouts in the fly combined with high
bathtub walls allow low-to-high ventilation. Even
when the vestibules are fully closed, catenary cuts
allow air movement under the vestibule and into
the tent.