RAVE Sports Bongo 20 Bouncer Water Park - Manual (Page 5)

Recommendation
For simple installation year after year, it is recommended to mark
each attachment position. Under each attachment point, use a
permanent marker to mark the location on the inflatable tube where
each rope is clipped by marking L for long rope and S for short rope.
This will assist you in attaching the harness in the future, and the
marks will be hidden when the trampoline is fully assembled.
Inspect the nylon glide periodically to ensure it is sliding freely along
the ropes. Remove weeds, foliage, or tangles that may prevent the
glide from sliding properly. This movement of the glide along the
ropes is necessary to maintain equal tension on the harness ropes
and helps prevent flipping of your trampoline in high winds.
Also inspect the stainless steel swivel periodically to ensure it is free
to rotate. This is critical to prevent twisting and damage to your
anchor rope.
Inspect the entire Anchor Harness each year before attaching, and
replace it if necessary.
The following conditions could result in potential hazards or damage
to your product:
• Fraying or deterioration of the rope.
• Corrosion or debris preventing the stainless steel anchoring
ring on the glide from spinning freely.
• Foliage or debris preventing the glide from sliding freely along
the ropes.
Inspect and correct, or replace as necessary, to ensure proper
function and performance of your anchoring system.
4