Rocktron Blue Thunder User Manual
Page 46
Program Changes
Step 2
To access MIDI Program Mapping, turn the FUNCTION SELECT control clockwise until the
Blue Thunder displays "PROGRAM CHANGES".
Program Changes allow for different MIDI program numbers to be assigned to Blue Thunder preset
numbers. For example, MIDI program #58 can be mapped to Blue Thunder preset #34. Then, when
program #58 is selected from a MIDI transmitting device (such as a Rocktron All Access foot control-
ler), preset #34 will be recalled on the Blue Thunder.
The Program Changes Map table is shipped from Rocktron at a one-to-one correspondance (i.e.
MIDI program #1 is mapped to Blue Thunder preset #1, 2 to 2, 3 to 3, etc.).
Step 3
Turn the PARAMETER SELECT control one step clockwise to display the current Program
Change On/Map/Off status.
PROGRAM CHANGES
PROG CHANGES
ON
Program Changes status options
ON - Execute MIDI program changes as received by a MIDI
controller
MAP - Use mapping table when a program change is received
OFF - Do not execute MIDI program changes
Step 4
Turn the PARAMETER ADJUST control to select the desired Program Changes status
setting.
PROG CHANGES MAP
Step 5
Press the STORE button to save the status selection. "STORED" will flash briefly on the
display.
STORED
Operating the Blue Thunder
43
Press the EDIT button to enter the “EDIT MODE”
EDIT MODE
Step 1