Rocktron Blue Thunder User Manual
Page 53
Advertising
To reload user data from a sequencer
Operating the Blue Thunder
Connect a standard MIDI cable from the MIDI OUT of the transmitting sequencer to the
MIDI IN on the receiving Blue Thunder.
Step 1
IMPORTANT:
Do not allow a looping connection from the MIDI OUT/THRU of the receiving Blue Thunder
back to the MIDI IN of the transmitting sequencer.
Turn the FUNCTION SELECT controls on both the receiving Blue Thunder until "MIDI
DUMP/LOAD" is displayed.
MIDI DUMP/LOAD
RECEIVING BLUE THUNDER
Turn the PARAMETER SELECT controls on the receiving Blue Thunder until "BULK
DUMP/LOAD" is displayed.
MIDI DUMP/LOAD
RECEIVING BLUE THUNDER
Step 4
Step 3
50
Press the EDIT button to enter the “EDIT MODE”
EDIT MODE
Step 2
Advertising