SkyRC e6650 - Manual (Page 5)

- 04 -
SPECIAL FEATURES
Automatic charging current limit
You can set up the upper limit of the charging current when
charging your NiCd or NiMH battery; it is useful for the NiMH
battery of low impedance and capacity in the 'AUTO' charging
mode.
Capacity limit
The charging capacity is always calculated as the charging
current multiplied by time. If the charging capacity exceeds the
limit, the process will be terminated automatically when you set
the maximum value.
Temperature threshold*
The battery’s internal chemical reaction will cause the temperature
of the battery to rise. If the temperature limit is reached, the
process will be terminated.
* This function is available by connecting optional temperature
probe, which is not included in our package.
Processing time limit:
You can also limit the maximum process time to avoid any
possible defect.
Input power monitoring
To protect the car battery used as DC input power from being
damaged, its voltage keeps being monitored. If it drops below
the lower limit, the process will be ended automatically.
Data store/load
The maximum five batteries’ data can be stored for users’
convenience. You can keep the data pertaining to program
setting of the battery of continuous charging or discharging.
Users can call out these data at any time without any special
program setting.
Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or
discharge>charge is operable for battery refreshing and Balancing
to stimulate the battery's activity.