Taser X2 - Manual (Page 17)

17 Chapter 3 Features
and 35-foot cartridges. The 25-foot cartridge is selected; it will be deployed when the trigger is pulled.
Battery Capacity
81-100%
Semi-Automatic
Mode
25-and 35-Foot
Cartridges
The CID below shows the Semi-Automatic mode icon, with two 25-foot training cartridges, and a battery that
is 21–40 percent full. The left cartridge is selected.
Battery Capacity
21-40%
Semi-Automatic
Mode
25-Foot Training
Cartridges
The CID below shows the Semi-Automatic mode icon, with one expended cartridge, one 25-foot cartridge that
is currently selected, a battery at 41–60 percent capacity, and an APPM battery pack installed.
Battery Capacity
41-60%
Semi-Automatic
Mode
Expended
Cartridge
25-Foot Cartridge
APPM
The CID below shows the manual mode icon, with one 25-foot cartridge that is currently selected, a 35-foot
cartridge, a battery at 81–100 percent capacity, and a TASER CAM HD recorder installed.
Battery Capacity
81-100%
Manual Mode
25-Foot Cartridge
35-Foot Cartridge
TASER CAM
HD Recorder
Probe-Deployment Mode
When the X2 CEW trigger switch is pulled and then released, it delivers an automatic 5-second Precision Shaped
Pulse™ deployment & cycle (unless the safety switch is shifted to the down (SAFE) position during those 5 seconds).
In probe-deployment mode, the CID display shows the deployment cycle duration for the most recent cartridge
deployed. If you deploy a second Smart cartridge a few seconds later (while the first cycle is running), the CID
will stop showing data for the first cartridge (though the first cartridge will still complete its deployment cycle)
and start displaying the deployment cycle duration for the second cartridge.
The cycle can be stopped at any time by shifting the safety switch to the down (SAFE) position. If both cartridges
are cycling and the safety switch is moved to the down (SAFE) position, then the electrical cycle will stop for
BOTH cartridges.