Taser X2 - Manual (Page 18)

18 Chapter 3 Features
Spark Duration
The CID displays a count indicating how many seconds the deployment cycle lasts. The CEW will count up from
the number 1 up to 99. At 99 seconds, the count will restart at 1.
ARC Switch
If you press the ARC switch, the CID will display the deployment cycle duration with the operating mode icon.
In the CID shown below, the Warning Arc display has been in effect for 3 seconds. The Semi-Automatic mode
icon displays, and the battery is 81–100 percent full.
Count
Battery Capacity
81-100%
Semi-Automatic
Mode
Top LASER
The top LASER installed in the X2 CEW is oriented with the mechanical sights. At 15 feet (4.6 m), the aiming point
is aligned to the approximate trajectory of a 25 foot (7.6 m) cartridge’s top probe.
Bottom LASER
At 15 feet (4.6 m), the bottom LASER is aligned to the approximate trajectory of a 25-foot (7.6 m) cartridge’s
bottom probe. The bottom LASER only appears when the selected bay contains a live cartridge or a resettable
training cartridge.
The bottom LASER is not aligned to the trajectory of a 35-foot (10.7 m) cartridge.
The X2 CEW can be configured to disable the bottom LASER when a 35-foot cartridge is selected in the CEW.