Altera Avalon Verification IP Suite - Manual (Page 61)

get_command_byte_enable()
bit [AV_NUMSYMBOLS-1:0] get_command_byte_enable (int index)
Prototype:
Verilog HDL: index
VHDL: command_byte_enable , index , bfm_id , req_if(bfm_id)
Arguments:
bit [AV_NUMSYMBOLS-1:0]
Returns:
Queries the received command descriptor for the transaction byte enable. For
burst commands with burst count greater than 1, the index selects the data cycle. Description:
Verilog HDL, VHDL Language support:
get_command_data()
bit [AV_DATA_W-1:0] get_command_data(int index)
Prototype:
Verilog HDL: index
VHDL:
command_data
,
index
,
bfm_id
,
req_if(bfm_id)
Arguments:
bit [AV_DATA_W-1:0] Returns:
Queries the received command descriptor for the transaction write data. For burst
commands with burst count greater than 1, the index selects the write data cycle. Description:
Verilog HDL, VHDL Language support:
get_command_debugaccess()
bit get_command_debugaccess()
Prototype:
Verilog HDL: None
VHDL:
command_debugaccess
,
bfm_id
,
req_if(bfm_id)
Arguments:
bit
Returns:
Queries the received command descriptor for the transaction debug access. Description:
Verilog HDL, VHDL Language support:
Altera Corporation Avalon-MM Slave BFM
Send Feedback
6-13 get_command_byte_enable()