Airmatic, Controls in detail, Driving systems – Mercedes-Benz 2010 CL Class User Manual
Page 319
The braking effect of the HOLD function is
canceled and the vehicle can start to roll if
R
the HOLD function is deactivated by
depressing the accelerator pedal or the
brake pedal
R
the HOLD function or the power supply is
malfunctioning, e.g. due to battery failure
R
the electrical components in the engine
compartment or the fuses have been
manipulated
R
the battery is disconnected
Never get out of the vehicle while the HOLD
function is activated!
The HOLD function must never be operated
or deactivated by passengers or from outside
the vehicle.
The HOLD function does not replace the
electronic parking brake. It must not be used
to secure the vehicle when parking.
Deactivate the HOLD function when leaving
or parking the vehicle. Use the electronic
parking brake to secure the vehicle.
When the HOLD function is activated, the
automatic transmission shifts into park
position
P automatically when
R
opening the driver’s door and releasing the
seat belt
R
turning off the engine
R
opening the hood
R
a system malfunction occurs
R
the on-board voltage is insufficient
The HOLD function is deactivated.
AIRMATIC
The AIRMATIC lets you select the chassis and
suspension setup. The chassis and
suspension setup adjusts the damping
behavior and the ride height for your vehicle.
The AIRMATIC consists of two components.
The Adaptive Damping System (ADS)
(
page 317) and the vehicle level control
The Adaptive Damping System (ADS) is
controlled electronically and operates
continuously. It adjusts the damping
characteristics to the current operating and
driving conditions. The damping is adjusted
individually for each wheel. Driving safety and
tire comfort are increased.
The fine tuning of the damping is dependent
on
R
your driving style
R
road surface conditions
R
your personal settings
The selected setting remains stored in
memory even if the SmartKey is removed
from the starter switch.
X
Start the engine.
Sporty damping adjustment
The firmer suspension tuning in sport driving
mode provides enhanced road contact.
Select this mode for example, on winding
highways.
Driving systems
317
Controls in detail
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 317
Z