Monroe Electronics Charge Plate - Analyzer - model 300 - Manual (Page 29)

29
Figure 12
Figure 13
Power up the Model 300. You should see the system prompt, -.-, without showing “COMM
ERR”.
Run the 300 PC software, or click on the Connection. It will search for the comport and the
devices. Select the comport that labeled with CPA-300. Then click the [Select highlighted
comport and exit].
Well done if you get to this
page.
Click Finish to close it.
If the driver is updated successfully,
the Device Manager page will show
the USB to UART icon for the 300
USB. It is on Com11 in this example.