Monroe Electronics R165A - Manual (Page 6)

6
control, and DTMF (telephone) control. Other devices can be used for controlling the R165A as long
as they provide the proper signaling.
Control by Time
The R165A can be directly connected to Monroe R153 program timers so that program signals
can be switched according to time schedules at the broadcast point or headend. The switch-timer
interface would look something like the following graphic.
Control by LAN
The R165A can also be easily controlled by anyone on the local network with a web browser. This application requires
interfacing the R165A with a network remote control, Monroe model R190A. The connection scheme is very similar to the
one used with the R153 above and would look like the following graphic.
Control by DTMF
The R165A can also be operated by one of the Monroe DTMF remote controls that allow switch
operation by DTMF signaling from a standard dial-up telephone (model 6002) or by a dry 600 ohm
audio line (model 6003). Connections for this application are shown in the following graphic.