Thrustmaster T60 Racing Wheel - Manual (Page 15)

6/8
• Pedal set mode changing procedure:
Simultaneously press and release: the 2 pedals + the PS button (4).
(This procedure must be carried out following every restart or disconnection of your wheel)
PEDAL SET MODE LED (5)
SEPARATE (default mode: recommended) RED
COMBINED GREEN
• Setup of pedals on PlayStation
®
3:
Separate pedals
(default mode)
Combined pedals
(must be selected)
- Gas = R2 trigger
on the PS3™ controller
- Brake = L2 trigger
on the PS3™ controller
- Gas = Up direction on the PS3™
controller’s right mini-stick
- Brake = Down direction on the
PS3™ controller’s right mini-stick
TROUBLESHOOTING AND WARNING
• My wheel is not functioning correctly or seems improperly calibrated:
- Switch off your PS3™ system, completely disconnect your wheel and all cables, reconnect everything
and then restart your game.
- Never move the wheel or the pedals when connecting your wheel, in order to avoid any calibration
problems.
• My pedal set is not functioning correctly:
- Always connect the pedal set to the wheel (9/8) before connecting the wheel's USB connector (7).
- Reconfigure your wheel in your game's controller options.
• I can't configure my wheel:
- On PS3™, in your game’s Options / Controller / Gamepads menu: select the most appropriate
configuration.
- You can also use your wheel’s programming function to resolve this type of problem.
• My wheel's steering is not responsive enough:
- Switch your wheel to High sensitivity mode.
- Adjust the sensitivity in your game’s options.