Analog Way PULSE2 (MIDRA) - Ref. PLS350 User Manual User Manual
User manual
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1. TRADEMARKS
- 2. INTRODUCTION
- 3. TERMS AND DEFINITIONS
- 4. HARDWARE SPECIFICATIONS
- 5. CONNECTING THE Pulse²
- 6. CONTROLLING THE Pulse²
- 7. OPERATING the Pulse² FROM THE RCS²
- 8. OPERATing through the front panel
- 8.1 Front panel
- 8.2 Settings in Mixer mode
- 8.2.1 Source Input selection
- 8.2.2 Input selection settings
- 8.2.3 Source Output selection
- 8.2.4 Output selection settings
- 8.2.5 Preview features
- 8.2.6 Preview Id
- 8.2.7 Working with layers
- 8.2.8 Working with layers functions
- 8.2.9 Opening transitions and closing Live layers
- 8.2.10 Layer adjustment menu
- 8.2.11 Layers with transitions & borders
- 8.2.12 Capturing frames
- 8.2.13 Working with frames
- 8.2.14 Opening transitions & closing Still Layers (Logos or Frames)
- 8.2.15 Frame input setup menu
- 8.2.16 Frames as layer
- 8.2.17 Capturing logos
- 8.2.18 Capturing an animated logo
- 8.2.19 Logos input setup menu
- 8.2.20 Working with logos
- 8.2.21 Logos as layer
- 8.2.22 Creating presets
- 8.2.23 Working with presets
- 8.2.24 Working with audio
- 8.2.25 Special features
- 8.3 Settings in native Matrix mode
- 8.3.1 Source Input selection
- 8.3.2 Input selection settings
- 8.3.3 Working with layers
- 8.3.4 Source Output selection
- 8.3.5 Output selection settings
- 8.3.6 Working with native Matrix mode
- 8.3.7 Working with Cut, Fade or Transitions
- 8.3.8 Working with presets in Matrix mode
- 8.3.9 Working with Mirror modes
- 8.5 Menu tree
- 9. Maintenance and support
- 10. Applications note and tips
- 11. Warranty
- 12. CONTACT information
- 13. APPENDICES