Introduction, 1 overview, 2 features – Artesyn ARTM-9405 16x10GbE Installation and Use Guide (May 2014) User Manual
Page 13: 3 standard compliances, 1 overview 1.2 features 1.3 standard compliances, Table 1-1, Standard compliances, Chapter 1
Chapter 1
ARTM-9405 16x10GbE Installation and Use (6806800P45F)
13
Introduction
1.1
Overview
ARTM-9405 is a rear transition module specifically designed for the use in combination with
the ATCA-9405 front board. The design of ARTM-9405 follows the standards of PICMG 3.0
Revision 1.0 AdvancedTCA Base Specification and PICMG 3.1 Revision 1.0 Specification
Ethernet/Fiber Channel for Advanced TCA Systems.
1.2
Features
The ARTM-9405 16x10GbE features are:
Base PCB
Eight 10Gb Ethernet interfaces via SFP+ pluggable transceivers
Two 40Gb Ethernet interfaces via QSFP pluggable transceivers
1.3
Standard Compliances
The product meets the standards listed below.
Table 1-1 Standard Compliances
Standard
Description
UL 60950-1
EN 60950-1
IEC 60950-1
CAN/CSA C22.2 No 60950-1
Legal safety requirements
CISPR 22
CISPR 24
EN 55022
EN 55024
FCC Part 15
Industry Canada ICES-003
VCCI Japan
AS/NZS CISPR 22
EN 300 386
EMC requirements (legal) on system level (predefined
Artesyn system)