Artesyn ARTM-9405 16x10GbE Installation and Use Guide (May 2014) - Manual (Page 30)

LEDs and I/O Interfaces
ARTM-9405 16x10GbE Installation and Use (6806800P45F) 30
3.5.3 Serial Console Connector
The ARTM-9405 provides an RJ-45 based serial interface connector at its face plate. Refer to the
ATCA-9405 Installation and Use Guide for the detailed information to the routing of the serial
interface.
The pinout of the serial interface connector at the ATCA-9405s face plate is as follows:
32 GND
33 Tx3p
34 Tx3n
35 GND
36 Tx1p
37 Tx1n
38 GND
Table 3-2 QSFP Connector Pin Assignments
Pin Signal
Table 3-3 Serial Console Connector Pin-out (Cisco Style)
Pin Signal Direction
1 RTS# IN
2 NC
3 TXD OUT
4 GND
5 GND
6 RXD IN
7 NC
8 CTS# OUT