Dot Hill Systems II 200 FC - Manual (Page 194)

H-8 SANnet II 200 FC, SATA, and SATA SE Array Installation, Operation, and Service Manual • March 2005
3. Display the attributes of the new file system.
H.10 Determining the Worldwide Name for IBM
Servers Running AIX
Before you can create host filters, you need to know the worldwide name (WWN) for
the FC HBA that connects your host to your FC array.
For supported IBM HBAs, perform these steps:
1. Determine the device name by typing the command:
2. Type the following command:
Output similar to the following is displayed. The network address is the WWN.
Figure H-2 Network Address Corresponding to WWN
# df -k mount-point
# lscfg | grep fc
# lscfg -vl device-name