D-Link DIR-68 - Manual (Page 22)

 D-Link DIR-68 User Manual
Section  - Configuration
Select Dynamic. IP. (DHCP) to obtain IP Address
information automatically from your ISP. Select this
option if your ISP does not give you any IP numbers to
use. This option is commonly used for Cable modem
services.
The Host Name is optional but may be required by
some ISPs.
Check the box if you are having problems obtaining
an IP address from your ISP.
Enter the Primary DNS server IP address assigned
by your ISP.
Maximum Transmission Unit - you may need to change
the MTU for optimal performance with your specific
ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port’s
physical interface MAC address on the Broadband
Router. It is not recommended that you change the
default MAC address unless required by your ISP. You
can use the Clone.Your.PC’s.MAC.Address button to
replace the Internet port’s MAC address with the MAC
address of your Ethernet card.
My Internet
Connection:
Host Name:
MAC Address:
Manual Configuration
Dynamic (Cable)
DNS Addresses:
MTU:
Use Unicasting: