Abort playing a playlist, Recue a clip, Press {cue} to position the clip to the head – DNF Controls 3040P-L_&_3040P-L-LT User Manual
Page 13: Press [last] to recue to the previous clip, Press [next] to move down one clip on the playlist, To load a list from memory, Press {load, Enter the list number to be loaded, from 1-50, Press [enter] to load and cue the selected list, Press [esc] to abort
3040P-L & 3040P-L-LT, Playlist Playout System, Louth Protocol Page
1
1
1
1
o
o
f
f
2
2
4
4
D. Abort Playing A Playlist
Press [STOP] to abort a PLAYLIST sequence.
E. Recue A Clip
1. Press {CUE} to position the clip to the head.
OR
2. Press {TOP} to position the PLAYLIST to the beginning.
OR
3. Press [LAST] to recue to the previous clip.
OR
4. Press [NEXT] to move down one clip on the PLAYLIST.
F. To Load A List From Memory
1. Press {LOAD}.
2. Enter the list number to be loaded, from 1-50.
3. Press [ENTER] to load and cue the selected list.
OR
4. Press [ESC] to abort.
G. Unload the List
Press {UNLOAD}.
The display shows “CLIP” in the upper righthand corner to indicate that
3040P-L is in the individual clip playout mode.
VIII.
COUNTDOWN DISPLAY MODES
Press [TME MODE] to toggle between a single element countdown (RT) or a
total list countdown (LT) mode.
The modes can only be switched if a list is loaded on a channel. In the single
clip playout mode, only elapsed time (ET) is displayed.