DNF Controls UABS-I Installation_Manual - Manual (Page 11)

Flex Control Network ® UABS-I Installation Manual 1 1 0 0 of 10
A. Set Password
The default password, when shipped from the factory, is “controls”, all
lower case. The password is used to access all configuration screens.
Using the web browser-
1) From the DC20 Home Page, click on the “System” link. The System
page will be displayed.
2) Click on “Set Password”. The Set Password page will be displayed.
3) In the “Old password” entry box, enter the current password.
4) Note- When shipped from the factory, the default password is
“controls”, all lower case.
5) Enter the new password in the “New Password” entry box.
6) Enter the new password in the “Verify New Password” entry box.
7) Click on “Save” to save the new password.
OR, click on “Cancel” to exit without changing passwords.
Note- If the “New Password” entry and the “Verify New Password”
entry do not match, an error will be displayed.