Exacq exacqVision Virtual User Manual - Manual (Page 4)

www.e x acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 4 of 44
4/12/2013
9. On the Network Mapping screen under Destination Networks, choose the network containing the exacqVision client.
10. Under Networking Properties, enter the Gateway, DNS, IP Address, and Netmask. If you prefer to use DHCP to populate
these values, click Next. This information can easily be changed from the web interface after deployment.
11. Under Ready to Complete, review the Deployment settings to make sure the information is correct. Select Power On After
Deployment if you want to start your server immediately (if you do not need to modify the default CPU, RAM, NIC, or disk
settings).
12. Click Finish.
You can watch the progress of the deployment in the Recent Tasks screen.