Introduction – Fenix Therm 105 User Manual
Page 22
20
Introduction
This is a microprocessor-controlled
thermostat for optimum regulation of
underfloor heating systems. The front
is fitted with a lockable knob for regu-
lating temperature, as well as an on/off
switch that shows whether the under-
floor heating is in operation.
Temperature control is carried out by
means of an algorithm that uses fuzzy
technology. The technology entails the
termostat testing and collecting data
from start-up, and based on this, cal-
culating when to turn on and off. This
technology reduces temperature vari-
ations and thus provides a more con-
stant temperature and lower energy
consumption. The floor temperature
varies less than +/- 0.3 degrees.
Thermostat with fuzzy-
technology
Thermostat without fuzzy-
technology
TIME
TEMP
.