Fenix Therm 105 - Manual (Page 31)

29
EN
Temperature
Regulating function
The thermostat regulates the
temperature via a sensor in the floor
that measures the temperature and
regulates the heating accordingly.
Set the temperature required
Change the floor temperature by turn-
ing the knob. Min. position on the con-
trol corresponds to 10 °C, max. position
corresponds to 45°C. An appropriate
setting is usually between 2 and 3.
The temperature does not stabilise
until the underfloor heating system has
been on for a few days. It might then
be necessary to adjust the thermostat’s
setting.
Indication
The colours on the on/off switch show
the current status for the thermostat.
Red light - the thermostat is on and the
underfloor heating is activated.
Green light- the thermostat is on and
the underfloor heating is switched off.