Geist Upgradeable PDU - Manual (Page 39)

Web Interface 39
© 2015 Geist GM1157 - GU PDU Instruction Manual
A test trap may be sent by clicking on the Test icon next to the trap destination.
4.2.5 Syslog
Syslog data can be captured remotely but must first be setup and enabled via the
Syslog page. Note that this function is primarily only useful for diagnostic purposes,
and should normally be left Disabled unless advised to enable it by Geist's technical
support for troubleshooting a specific issue.
4.2.6 Admin
The Admin page allows the administrator of the device to save their contact
information along with the device description and location. Once the info is saved by
an administrator, other (non-administrator) users can view the information. Also, the
System Label can be modified on this page; this label is typically shown in the title bar
of the web browser's window, and/or on the browser tab(s) currently viewing the
device.
Note that this information is strictly for the users' and administrator's convenience; the
unit will not attempt to send e-mails to the "Administrator Email" address, and this
address cannot be chosen as the Target of an Event Action when configuring an Alarm
or Warning Event.
4.2.7 Locale
The Locale page sets the default Language and Temperature Units for the device.
These settings will become the default viewing options for the device, although
individual users can change these options for their own accounts. (The Guest account