Gullco GK-200-RLx-L - Manual (Page 4)

2
SAFETY PRECAUTIONS
The following cautionary/warning label is attached to each “KAT”
®
carriage:-
The above label pictorially represents the following:
“Warning:-
Read the manual before turning the unit on and before performing service.
Also, positively disconnect the unit from all power supplies before servicing!”
IMPORTANT
READ THIS BEFORE OPERATING THE “KAT”
®
CARRIAGE/COMPACT OSCILLATOR
WARNING! Always turn the main power off before connecting/disconnecting the oscillator head
cable to/from the “KAT”
®
carriage. Failure to comply may result in control damage.
Ensure that an adequate and well-maintained weld return path is provided with good electrical
contact. Failure to do so may result in the welding current passing through the carriage and
damaging the wiring and electrical components.
Important information regarding safety and operation of the “GSP-2100” motor control used in the
“KAT”
®
carriage is contained in a supplemental manual attached at the end of the Technical
Manual. It is equally important to read, understand and apply the information contained within the
manual. The supplemental manual (GD-075) has a title “Technical Information For The Gullco
“GSP-2100” Micro-Processor Based, 24 Volt DC Motor Control”, and it’s pages are numbered with
a prefix of “T-“.
ALL THE SAFE PRACTICES AND PRECAUTIONS MAY NOT BE GIVEN IN WRITING. SOME
ARE BASED ON COMMON SENSE, BUT OTHERS MAY REQUIRE TECHNICAL
BACKGROUND TO EXPLAIN.