Gullco GK-200-RLx-L - Manual (Page 5)

3
“KAT”
®
CARRIAGE/COMPACT OSCILLATOR COMBINATION
This manual covers the operation instructions of the following “KAT”
®
Carriage/Compact Oscillator
systems, using Rigid or Flex “KAT”
®
, all position, variable speed travel carriages and either Linear
or Radial Oscillator heads (* indicates input voltage: ‘A’ = 42 VAC; ‘B’ = 115 VAC; ‘C’ = 230 VAC):
GK-200-RL*-L / GK-200-RM*-L / GK-200-RH*-L
GK-200-RL*-R / GK-200-RM*-R / GK-200-RH*-R
GK-200-FL*-L / GK-200-FM*-L / GK-200-FH*-L
GK-200-FL*-R / GK-200-FM*-R / GK-200-FH*-R
GENERAL DESCRIPTION
This advanced Gullco oscillation package combines the Gullco “KAT”
®
all position, travel carriage
with either the Linear or Radial compact oscillator head and oscillator control which is incorporated
into the carriage.
The Gullco “KAT”
®
is a heavy duty, all position travel carriage. It is an electrically powered, self
propelled carriage that travels in a forward or reverse direction, at precisely controlled speeds,
along a special track. The self aligning wheel system of the carriage grips the top and bottom of the
track, enabling it to travel along any plane. The bogey wheel assembly keeps the carriage snug to
the track, while allowing it to be easily mounted and removed from the track at any point. The
positive drive of the “KAT”
®
is obtained from either a pinion that engages with the rack of the rigid
track, or a spherical sprocket gear that engages with slots in the flex track. Both of these systems
are driven by a low voltage permanent magnet motor and gear-head power unit assembly. Safety
is greatly enhanced by the use of Gullco’s low voltage (24 V), highly advanced control/power supply
system that is available in three line voltage inputs... 42, 115 and 230 VAC, single phase, 50/60 Hz,