Gullco GK-200-RL - Manual (Page 20)

18
Arc Signal Relay
(Wire Feed Signal)
Kit
Travel Limit Switch Kit
ACCESSORIES
GK-191-P-071
Arc Signal Relay Kit
A modular kit, typically used to provide an isolated relay signal (generated
by the GSP control during automated welding/cutting cycles), to the trigger
input of the welding/cutting equipment.
GK-191-P-045
“KAT” Carriage Travel
Limit Switches
Forward and reverse travel limit switches mounted to the “KAT” carriage,
complete with wiring and two adjustable track mounted actuators.
GK-166-153
High Speed Gear
Assembly
An external gear assembly is available which can easily be fitted to any of
the rigid track “KAT” carriages to increase the available speed range.
GK-166-169
Low Speed Gear
Assembly
An external gear assembly is available which can easily be fitted to any of
the rigid track “KAT” carriages to decrease the available speed range.
GK-190-067
Lower Housing Dust
Cover A cover which is installed to the lower housing, reducing the drive opening
to minimize dust & smoke pollutions to the interior of the “KAT” carriage.
Not for use in conjunction with high or low speed gear trains.
Other Accessories:
The “KAT” carriage is drilled to facilitate the mounting of rack boxes and rack box riser brackets,
cable support brackets, as well as links for towing idler carriages. Many other accessories such as
remote controls, oscillation, seam tracking, auto indexing, auto stitch welding, and automatic
overlaying are also available for fitting to the “KAT” all position, variable speed travel carriage.
Visit Gullco’s web site, “ www.gullco.com ” to see, or
request, more product and application information.