Guntermann & Drunck CATpro2-DVI - Manual (Page 6)

Installation
3 · G&D CATpro2-DVI-UC
Installation
Interfaces on the front panel
USB Pwr: If you want to supply the target module with power by using two USB
interfaces, connect one of the computer’s USB interfaces to this interface.
USB CPU: The console’s keyboard and mouse signals are transmitted to the compu-
ter using this interface.
Connect one of the computer’s USB interfaces to this interface.
DVI-D CPU: Insert the supplied DVI-D video cable into this interface and connect it
to the computer’s graphic output.
Figure 1: Front view of the CATpro2-DVI-UC target module
The device can be supplied with power using two of the computer’s USB interfaces
if both the USB Pwr and the USB CPU interface are connected to the target module.
The user is enabled to apply other possibilities to supply the target module with
power:
ƒ connect the optional AC adapter to the Power In interface.
ƒ connect an optional Power Loop cable to the Power In interface.
The Power In interface described on the following page and the chapter Power supply
via Power Loop cables on page 10 provide further information regarding this topic.