IDK MSD-804FD - Manual (Page 127)

MSD-804FD Users Guide (Command Guide)
127
@GSS Get I/O status
Command format @GSS, channel, mode
Return value
format @GSS, channel, mode, status_1 (, status_2, status_3･･･)
Parameter channel : I/O port
1 = IN1, 2 = IN2, 3 = IN3, 4 = IN4, 5 = IN5,
6 = IN6, 7 = IN7, 8 = IN8, 11 = OUT1A, 12 = OUT2A
13 = OUT3A, 14 = OUT4A, 15 = OUT1B, 16 = OUT2B, 17 = OUT3B,
18 = OUT4B *1
*1 Can be set only if Cat5e/Cat6 output option is installed.
mode : Status to be attained
For channel = 1 to 8 (Input port)
0 = All of 1 to 4, 1 = Input type *2 ,
2 = Video input format *3 ,
3 = Audio input format *4 , 4 = HDCP input
For channel = 11 to 18 (Output port)
0 = All of 1 to 3, 1 = HDCP authorization *5 , 2 = Output type *6 ,
3 = Error code *7
* 2 For input signal type
Reply Input type
Hxx HDMI signal is input. xx stands for color depth which is 24 or 30.
D
DVI signal is input
N No signal input
* 3 For video input signal format
Reply Video input format
1080i 59.94Hz SDTV/HDTV signal is input, which replies the format
type and vertical synchronous frequency
800 x 600
60.00Hz RGB signal is input, and [Horizontal resolution x
Vertical resolution and vertical synchronous frequency]
is replied.
NO SIGNAL No video signal is input